The condensate pump KP-6 is used to remove the condensate water from the indoor units or cold water outlets to higher drains. Depending on the space available, the condensate pump can be mounted on the wall to the right or left below the wall-mounted indoor unit. An integrated float switch switches the pump on and off. If the condensate level is too high, the safety switch will switch off the cooling request (compressor contact) and release an alarm contact.

The kit is only intended for vertical installation and condensate drainage through the ceiling in combination with wall-mounted units.

The cable duct has a length of 80 cm.

Properties:
Compact, powerful condensate pump
Delivery rate: max. 10 l/h
Delivery head: max. approx. 10 m
Protection class: IP 54
Very low noise level, below 22 dB(A)
Cable duct color: white
Can be connected on the right or left side
Ready-to-install kit incl. cable duct, cover bracket and vibrator. Cable duct, cover bracket and vibration-damped pump holder

Dimensions:
Width: 85 mm
Depth: 135 mm
Length: 800 mm

For device series RVT/MXW/RXT and many more, incl. cable duct for surface mounting

Technical characteristic	Value
Item ID	6811
Condition	New
Age rating	No age restriction
Model	KP-6
Manufacturer	Remko
Manufacturing country	Germany
Content	1 piece
Weight	1700 g
Net weight	1700 g
Customs tariff number	84135069

Condensate pump, similar to Remko KP-6 incl. duct from 2018 for all wall-mounted appliances up to 10kW |